Polyanionic Cellulose

Polyanionic Cellulose
Product Introduction:
Polyanionic cellulose,ME-PAC is a blended sized filtration loss control agent with extremely low Viscosity.
Send Inquiry
Description
Technical Parameters

PRODUCTS TECHNICAL DATA

PRODUCT NAME :Polyanionic cellulose,ME-PAC 

 

COMPOSITION / INFORMATION ON INGREDIENTS AND APPLICATIONS

 

Polyanionic cellulose,ME-PAC is a blended sized filtration loss control agent with extremely low

viscosity, Blended sized is used as rheological regulators to adjust the rheology of drilling fluid quickly under the condition of low dosage. Its used in most water-based drilling fluids including fresh water, sea-water, and brine up to 300°F (149°C). filtration control additive has a very low impact on fluid rheology, is non-toxic and does not require a biocide. filtration control additive exceeds the European specifications for low viscosity polyanionic.

Polyanionic cellulose Advantages

»Effective in fresh water, salt water, and brine-based drilling fluids

»Effective in small concentrations for filtration control

»Is stable at temperatures up to 300°F (149°C)

»Effective in moderate to high pH systems

»Does not require a bactericide

»strong salt resistance and calcium and magnesium resistance

 

Mud containing Polyanionic cellulose,ME-PAC can make the well wall form thin and strong, low permeability filter cake, and reduce the fluid loss;

High substitution degree, good substitution uniformity, high viscosity, low dosage,

effectively improves the mud use efficiency;

Moisture-resistant, salt-resistant, alkali-resistant, suitable for fresh fluid, seafluid,

saturated salt water-based mud;

Mud cake quality is good and stable, which can effectively stabilize soft soil structure and prevents well wall collapse; entering pores and fractures;

Use Polyanionic cellulose,ME-PAC to make the pressure filter fluid, that can withstand 2% kcl solution and has good solubility, easy to use, can be prepared on the spot, and has fast glue forming, strong sand carrying ability.

 

Recommended dosage: 2-4% Appearance: Brown flowing powder. PH : 7-8


 

Hot Tags: polyanionic cellulose, suppliers, manufacturers, datasheet, China, USA, India, Russia, Kuwait, Saudi Arabia, Asphaltic Fluid Loss Control Agent in Saudi Arabia, High temperature Fluid loss Control Agent in USA, Drilling Fluids Additives in Kuwait, Swellable Hydratable LCM s Combinations in Kuwait, Asphaltic Fluid Loss Control Agent in Kuwait, Polyanionic Cellulose in USA

Send Inquiry
Start your customized drilling fluid journey!
contact us