PRODUCTS TECHNICAL DATA
PRODUCT NAME :Fluid-loss Additive In High Temperature,ME XP-10
COMPOSITION / INFORMATION ON INGREDIENTS AND APPLICATIONS
Fluid-loss Additive In High Temperature ,ME XP-10 is a kind of oil-base mud modified Gilsonite. It can inhibit the dispersion of drilling cuttings, control HTHP filtration, produce thin and dense mud cake, maintain low shear rate under HTHP, reduce the transmission of pore pressure and seal micro fractures and low porosity sand. Keep formation integrity and develop effective filter cake. Because the decomposition temperature of the product is as high as 500 °F, highly-dispersive and fractured shales with sloughing tendencies, hard, brittle shales in which moderate dispersion exhibits severe sloughing, a high-strength adsorption membrane is formed on the surface of mud cake. The plugging principle is used to reduce the permeability of mud cake, improve the quality of mud cake and reduce the filtration loss.
Typical Physical Properties | |
Physical appearance | Black powder |
Specific gravity | 1.04–1.06 |
Resistance of bottomhole static temperature (BHST) | 230-250 °C |
Flash point | 310 °C |
Ash content | Less than 20% |
Typical concentrations range | 5.7 to 23 kg/m3 |
Hot Tags: fluid-loss additive in high temperature, suppliers, manufacturers, datasheet, China, USA, India, Russia, Kuwait, Saudi Arabia, Fluid loss Additive In High Temperature in Russia, Shall Inhibitor For OBM And WBM in USA, Seepage Lost Circulation Control in India, OBM Filtration Loss Control And Seapage Loss Control Material For High Temperature, loss circulation material suppliers, Resilient Lost Circulation Material in Kuwait
